Kimya Mühendisliği (İngilizce) Yüksek Lisans Programı Yayınlar ve Tezler


Yayınlar ve Tezler

 

1. Adı Adı Adı: Prof. Dr. Mehmet Savsar

2. Doğum Tarihi:           10 Şubat, 1952

3. Üni:

4. Üretim Durumu: Doktora


Derece 

Alan 

Üniversite 

Yıl 

Lisans
Orman Endüstri Başkanı
Karadeniz Teknik Üniversitesi
1975
Y. Lisans
Endüstri Ztd.
Pennsylvania State University,
PA, Amerika Birleşik Devletleri
 1978
Doktora
Endüstri Orkestrası ve Yöneylem Nasılsayı
Pennsylvania State University,
PA, Amerika Birleşik Devletleri
1982





 

 

5. Akademik Unvanlar: 

Yardımcı Doçentlik Tarihi :     1982

Doçentlik Tarihi               :       1986                                         

2003

 

6. Etkilenen Yüksek Lisans ve Doktora Tezleri

      6.1. Yüksek Lisans Tezleri 

• M.Sc:Karma Ürünlerin Tempolu Montaj Hattında Sıralansın için Dal ve Bağlı ve Sezgisel Algoritmalar, Kral Suud Üniversitesi, 1992.

• M.Sc:Yaşa Dayalı Önleyici Değiştirme (Eş Gözetimli), Kral Suud Üniversitesi 1992 kapsamında optimal yedek parça sağlama politikası.

• M.Sc:Just-In-Time Üretim Sistemlerinin Modellemesi ve Analizi, King Saud Üniversitesi 1996.

• M.Sc:Dengeleme Kısıtlamaları olan Çok Aşamalı Üretim Sistemlerinde Makine Seçimi Optimizasyonu. Kuveyt Üniversitesi, 2002.

      6.2. Doktora Tezleri

  • Doktora: Bir Deniz Suyu Pompalama İstasyonunun İşletmesi ve Bakımı için Karar Destek Sisteminin Tasarımı (Swinburne Üniversitesi, Avustralya; Dış Danışman), 2004-2011.

  

7. Yayınlar 

7.1. Uluslararası hakemli dergiler makaleler (SCI & SSCI & Sanat ve Beşeri Bilimler)

1. Savsar, M. ve Kersavage, P.C. (1982), "Testere Frezelemede Üretilen Malzeme Miktarını Belirlemek için Matematiksel Bir Model", Orman Ürünleri Dergisi, Cilt 32, No. 11, 35-38.

2. Savsar, M. ve Biles, W. E. (1985), "Tek Onarım Ekibi ile İki Aşamalı Üretim Hatları", Uluslararası Üretim Araştırmaları Dergisi, Cilt 22, No. 3, 499-514.

3. Savsar, M. ve Biles, W.E. (1985), "Otomatik Üretim Akış Hatlarının Simülasyon Analizi"" Malzeme Akış Günlüğü, Cilt 2, 191-201.

4. Kersavage, P.C., Savsar, M. ve Meimban, R.J. (1990), "Kereste Fabrikası Kenar İşleminde Üretilen Kalıntıların ve Kerestelerin Hacmini Belirlemek için Matematiksel Bir Analiz" Ahşap ve Lif Bilimi, Cilt 22, s. 271-282.

5. Savsar, M. (1990), "Simülasyona Göre Esnek Tesis Düzeni", Bilgisayar ve Endüstri Mühendisliği", Cilt 20, No. 1, 155-165.

6. Cogun, C. ve Savsar, M. (1990), "Elektrik Deşarj İşlemede Deşarj Darbelerinin Özelliklerinin İstatistiksel Modellemesi", Uluslararası Takım Tezgahları İmalat Dergisi, Cilt 30, No. 3, 467-474.

7. Savsar, M. ve Cogun, C. (1993), "Stokastik Modelleme ve Tek ve Çift Tutucu Robotlarla İki Esnek Üretim Hücresinin Karşılaştırılması", Uluslararası Üretim Araştırmaları Dergisi, Cilt 31, No. 3, 633-645.

8. Savsar, M. ve Cogun, C. (1994), "Oluklu Kutu Fabrikasında Üretim Hattının Analizi ve Modellemesi", Uluslararası Üretim Araştırmaları Dergisi, Cilt 32, No. 7, 1571-1589.

9. Bolat, A., Savsar, M., ve Al-Fawzan, M.A. (1994), "Karma Model Montaj Hatlarındaki İşlerin Gerçek Zamanlı Planlanım algoritmaları", Bilgisayar ve Operasyon Araştırmaları, Cilt 21, No. 5, 487-498.

10. Savsar, M. ve Al-Jawini, A. (1995), "JIT Sistemlerinin Simülasyon Analizi", Uluslararası Üretim Ekonomisi Dergisi, Cilt 42, 67-78.

11. Savsar, M. (1996), "Orta Depolama ile Kağıt Hamuru ve Kağıt Fabrikasının Stokastik Modellemesi", Uluslararası Sistem Bilimi Dergisi, Cilt 27, No. 12, 1251-1264.

12. Savsar, M. (1996), "Kanban Çekilme Politikalarının ve Diğer Faktörlerin JIT Sistemlerinin Performansına Etkileri- Bir Simülasyon Çalışması", Uluslararası Üretim Araştırmaları Dergisi, Cilt 34, No. 10, 2879-2899.

13.  Cogun, C. and Savsar, M. (1996), “Performance Evaluation of a Flexible Manufacturing Cell (FMC) by Computer Simulation”, Modeling Measurement, & Control B, Vol. 62, No. 2, 31-44.

14.  Savsar, M. (1997), “Simulation Analysis of a Pull-Push System for an Electronic Assembly Line”, International Journal of Production Economics, Vol. 51, 205-214.

15.  Savsar, M. (1997), “Simulation Analysis of Maintenance Policies in Just-In-Time Production Systems”, International Journal of Operations & Production Management, Vol. 17, No. 3, 256-266.

16.  Savsar, M. (1998), “Effects of Scheduling Policies on the Performance of Transfer Lines with Duplicate Stations”, Production Planning and Control, Vol. 9, No.7, 660-670.

17.  Savsar, M. (1998) “Analysis of Saudi Arabian Maritime Transportation Industry” International Journal of Maritime Policy and Management, Vol. 25, No. 2, 185-200.

18.  Savsar, M. and Allahverdi, A. (1999), “Algorithms for Scheduling of Jobs on Two Serial Duplicate Stations”, International Transactions in Operational Research, Vol. 6, No. 4, 411-422.

19.  Savsar, M. (1999), “Simulation of Dynamic Resource Allocation Policies on Transfer Lines with Serial Duplicate Stations” Simulation, Vol. 72, No. 6, 391-400.

20.  Savsar, M. and Choueiki, H. (2000), “A Neural Network Procedure for Kanban Allocation in JIT Production Control Systems”, International Journal of Production Research, Vol. 38, No. 14, 3247-3265.

21.  Savsar, M. (2000), “Reliability Analysis of a Flexible Manufacturing Cell”, Journal of Reliability Engineering & System Safety, Vol. 67, No. 2, 147-152.

22.  Allahverdi, A. and Savsar, M. (2001), “Stochastic Proportionate Scheduling with Setups”, Computers and Industrial Engineering, Vol. 39, No. 3-4, 357-369.

23.  Allahverdi, A. and Savsar, M. (2002), “Scheduling of Three Serial Duplicate Stations in Assembly Lines with Setups”, International Journal of Industrial Engineering: Theory, Applications and Practice, Vol. 9, No.3, 265-274.

24.  Savsar, M. and Al-Anzi, F. S. (2005), “Reliability of Data Allocation on a Centralized Service Configuration with Distributed Servers”, The Computer Journal, 49(3): 258-267.

25.  Aldaihani, M. and Savsar, M., (2005), “Stochastic Modeling and Analysis of a Two-Machine Flexible Manufacturing Cell”, Computers and Industrial Engineering, 49, 600-610.

26.  S. Almutawa, Savsar, M., Al-Rashdan, K. (2005) "Optimum Machine Selection in Multistage Manufacturing Systems". International Journal of Production Research, Vol. 43, No: 6, 1109-1126.

27.  Savsar, M. (2005), “Effects of Random Material Flow Volumes on Layout Flexibility”, International Journal of Industrial Engineering: Theory, Applications, and Practice, 12(3), 234-243.

28.  Savsar, M., (2005), “Performance Analysis of an FMC Operating under Different Failure Rates and Maintenance Policies”, International Journal of Flexible Manufacturing Systems, Vol. 16, 229-249.

29.  Savsar, M., (2006), “Effects of Maintenance Policies on the Productivity of Flexible Manufacturing Cells”, Omega: The International Journal of Management Science, Vol. 34, 274-282.

30.  Savsar, M., (2006) “Buffer Allocation in Serial Production Lines with Preventive and Corrective Maintenance Operations”, Kuwait Journal of Science and Engineering, 33(2): 1-14.

31.  Alsalamah, M. J., Shayan, E., and Savsar, M. (2006), “Reliability Analysis of a Cooling Seawater Pumping Satiation”, International Journal of Quality and Reliability Management, Vol. 23, No. 6, pp. 670-696.

32.  Savsar, M. and Abdulmalek, F. (2008), “Modeling of a Pull-Push Assembly Control System to Minimize Inventory and Demand Delay Costs”, International Journal of Industrial Engineering: Theory, Applications, and Practice,, Vol. 15, No. 1, 83-91.

33.  Savsar, M., (2008), "Calculating Production Rate of a Flexible Manufacturing Module", International Journal of Advanced Manufacturing Technology, Vol. 37: 760-769.

34.  Savsar, M., (2008) “Modeling of Multi-Stage Production Lines with Maintenance Operations”, International Journal of Computer Integrated Manufacturing, Vol. 21, No.4, pp. 396-406.

35.  Savsar, M. and Aldaihani, M. (2008), “Modeling of Machine Failures in a Flexible Manufacturing Cell with Two Machines Served by a Robot”, Journal of Reliability & System Safety, Vol. 93, No. 10, 1551-1562.  

36.  Savsar, M. and Allahverdi, A. (2008), “Senior Design Course in Industrial Engineering at Kuwait University”, International Journal of Continuing Education and Life-Long Learning, Vol. 18, 253-263.

37.  Aldaihani, M. and Savsar, M. (2008), “Stochastic models for reliable and unreliable flexible manufacturing cells with two machines and two robots”, International journal of Industrial and Systems Engineering, Vol. 3, No. 5, 610-624.

38.  Savsar, M. (2011). "Multi-State Reliability Modeling of a Manufacturing Cell", International Journal of Performability Engineering, Vol. 7, No. 3, 205-216. 

39.  Savsar, M. (2011), "Analysis and Modeling of Maintenance Operations in the Context of an Oil Filling Plant", Journal of Manufacturing Technology Management, Vol. 22, No. 5, 679-697.

40.  Salamah, M., Kapoor, A., Savsar, M., Ektesabi, M. M., Abdekhodaee, A., and Shayan, E. (2011). “The Detection of Flow Meter Drift by Using Statistical Process Control”, International Journal of Sustainable Development and Planning, Vol. 6, No. 1, 91-103. 

41.  Savsar, M. (2011), “Modeling of Hybrid Production Systems with Constant WIP and Unreliable Equipment”, International Journal of Information Systems and Supply Chain Management, Vol. 4, No. 4, 46-66.

42.  Savsar, M. and Al-Ajmi, M. (2012). "A Quality Control Application in Health Care Management Using DOE", International Journal of Health Care Quality Assurance, Vol. 25, No. 1, 53-63.

43.  Abdulmalek, F., Savsar, M., and Aldaihani, M. (2012) "Design of Experiments for the Analysis of the Effects of Pallet Arrival Patterns and Maintenance Policies on FMC Productivity," International Journal of Applied Management Science, Vol. 4, No. 1, 91-106.

44.  Al-Salamah, M., Shayan, E., and Savsar, M. (2010) “Minimizing the Conflict between Operation and Maintenance-A Case Study”, International Journal of Data Analysis and Information Systems, Vol. 2, No. 1, 19-38.

45.  Salamah, M., Palaneeswaran, E., Savsar, M., Ektesabi, M. (2011), “Detecting Flow Meter Drift by Using Artificial Neural Networks”, International Journal of Sustainable Development and Planning, Vol. 6, No. 4, 512-521.

46.  Savsar, M. (2012, "Effects of Degraded Mode Operation on Reliability and Performance of Manufacturing Cells" International Journal of Industrial and Systems Engineering. Vol. 11, No. 1/2, 189-204.

47.  Savsar, M., Atash, M., and Alnaqi, J. (2012), "Scheduling and Routing of City Buses at Kuwait Public Transport Company", International Journal of Operational Research, Vol. 1, No. 3, 11-32.

48.  Savsar, M. and Aldaihani, M. (2012), “A Stochastic Model for Analysis of Manufacturing Modules”, International Journal of Applied Mathematics and Information Sciences, Vol. 6 No. 3, 650-660. 

49.  Savsar, M. (2013), "Modeling and Simulation of Maintenance Operations at a Public Transport Company", Kuwait Journal of Science, Vol. 40, No. 2, 115-129.

50.  Aleisa, E., Savsar, M, Al-Mashaan, M, Al-Jadi, A, Al-Sabah, S. (2013) " A Metaheuristic Approach for Location of Gas Stations in a Metropolitan Area," International Journal of Operational Research, Vol. 21, No. 2, 172-200.

51. Savsar, M. (2014), “Fire Station Location Analysis in a Metropolitan Area”, International Journal of Industrial and Systems Engineering, Vol. 16, No. 3, 365-381

52.  Savsar, M. and Aleisa, E. (2014) "Simulation Modeling and Analysis of Fire Fighting Operations in the State of Kuwait", International Journal of Information Systems and Supply Chain Management, Vol. 8, No.2, 31-48.

53.  Alenezi, A., Alkhedher, and Savsar, M. (2015) “Determination of Optimal Lot Size and Sampling Plan for Single-Producer Single-Retailer Supply Chain System”, International Journal of Applied Mathematics and information Sciences, Vol. 9, No. 6, pp. 2973-2982.

54.  Alkhedher, M., Alenezi, A., and Savsar, M. (2017), “Modeling the Newsvendor Problem with a Random Fraction of Defective Items in the Lot,” International Journal Procurement Management, Vol. 10, No. 4, 495-513.

55.  Savsar, M. and Al-Ali, M, H. (2017) “Classification and Analysis of Hazardous Conditions and Near Misses by Using Fault Trees: A Case Application in Oil Industry”, China-USA Business Review, Vol. 16, No. 4, 189-199.

56. Savsar, M., Aboelfotoh, A., and Embaireeg, D. (2019) “A GIS-Based Methodology for Solving the Capacitated Vehicle Routing Problem with Time Windows: A Real-life Scenario” International Journal of Applied Management Science, Vol. 11, No. 2 pp. 124-152.

      7.2. Uluslararası diğer hakemli dergilerde yayınlanan makaleler

1.   Savsar, M (1989), “Production Line Simulator Evaluates Performance of System Design

      Alternatives”, Industrial Engineering, Vol. 15, No. 5, 60-63.

2.   Savsar, M. and Kilic, S.E. (1991), “Simulation of Multi-Stage Manufacturing Systems to Evaluate Different Tool Changing Policies”, Journal of King Saud University Engineering Sciences, Vol. 3, No.2, 203-216.

3.   Savsar, M. (1992), “Maintenance Crew Size Determination by Computer Simulation”, Journal of King Saud University Engineering Sciences, Vol. 4, 45-66.

4.   Savsar, M. (1992), “Modeling of a Two-Stage Merge production with Buffer Storage”, Journal of King Abdulaziz University Engineering Sciences, Vol. 4, 67-81.

5.   Savsar, M., Bolat, A. and Khan, R. (1995) "Development of Maritime Transportation Industry in the Kingdom of Saudi Arabia", Journal of The Industrial Cooperation in the Arabian Gulf, Vol. 62,

6.   Savsar, M; Youssef, A.S., (2004) "An Integrated Simulation-Neural Network Meta Model Application in Designing Production Flow Lines", WSEAS Transactions on Electronics, Vol.1, 366-371.

7.   Abdulmalek, F., Savsar, M., and Aldaihani, M., (2004) “Simulation of Tool Change Policies in a Flexible Manufacturing Cell”, WSEAS Transactions on Systems, 7(3), 2546-2552.

8.   Moreb A, and Savsar, M. (2007) “Minimizing Defects in Tufting Process Using Full Factorial Design”, WSEAS Transactions on Business and Economics, 3(4), 54-57.

9.   Savsar, M. and Youssef, A. S., (2007), “Neural Network Applications to Buffer Allocation Problems in Automated Transfer Lines”, Al-Azhar University Engineering Journal, 2(4),389-400.

10.  Savsar, M. (2009). "Modeling and Simulation of a Serial Production Line with Constant Work-In-Process”, World Academy of Science, Engineering and Technology, No. 53, 1195-1203.

11.  Savsar, M. and Abdulmalek, F. (2012), “Analysis of The Effects of Different Factors on Aircraft Maintenance Delays”, International Journal of Decision Sciences, Vol. 3, No. 2, 159-175.

12.  Savsar, M. (2012), “Analysis and Scheduling of Maintenance Operations for a Chain of Gas Stations," Journal of Industrial Engineering. Vol. 2013, pp. 1-7.

13.  Savsar, M. (2013), “Simulation Analysis of the Effects of maintenance Policies on Manufacturing Line Productivity”, Applied Mechanics and Materials, Vol. 390, 646-652.

14.  Aleisa, E., Savsar, M. (2013: “Modeling of Firefighting Operations through Discrete Event Simulation,” International Journal of Computer Theory and Engineering, Vol. 5, No. 4, 678-682.

15.  Savsar, M. and Aleisa, E. (2013) “Simulation Modeling and Analysis of In-Flight Service Operations for Commercial Passenger Flights”, International Journal of Applied Operational Research, Vol. 2, No. 4, 27-40.

16.  Savsar, M. (2015) “Availability Analysis of a Power Plant by Computer Simulation", World Academy of Science, Engineering and Technology, International Journal of Electrical, Computer, Energetic, Electronic and Communication Engineering Vol. 9, No. 4, 495-498.

17.  Savsar, M. (2016) “Reliability and availability analysis of a manufacturing line system”, Journal of Applied and Physical Sciences, 2016, 2(3): 96-106.

18.  Savsar, M. (2017)” A Quality Improvement Application in Healthcare Management”, Insight Medical Publishing Journals: Trauma and Acute Care, Vol. 2, No. 1:30, pp.1-5.

19.  Savsar M. (2017) “Analysis of an Assembly Line in Food Processing Industry: A Case Study,” Journal of Management and Engineering Integration.

  • Savsar, M. (2019) “Reliability Analysis of a Life Supports System in a Public Aquarium”,  Accepted for publication in International Journal of Advances in Science, Engineering & Technology (IJASEAT). Vol. 7, No. 3, pp. 37-42.

21. Savsar, L. and Savsar, M. (2019) “Healthcare Quality and Narrative Medicine,”

      International Journal of Advances in Social Sciences, Vol. 5, No. 15.Savsar, M., Bulak, M. E., and Kozanoglu, O. (20210) “Optimization of Surgical    Schedules at a Specialist Hospital: A case Application”, 4th International Symposium on Multidisciplinary Studies and Innovative Technologies, October   22-24, Turkey

22. Savsar, M. and Çiçek, H. (2020) “Analysis of Effects of Some Factors  Performance of a Dental Clinic”, 4th International Symposium on Multidisciplinary    Studies and Innovative Technologies, October 22-24, Turkey.

23. Savsar, M. and Çiçek, H. (2021) ‘Analysis and Improvement of Production     Planning Processes in a Food Factory’, 5th International Symposium on  Multidisciplinary Studies and Innovative Technologies, October 21-23, 2021,  Turkey

       

 24. Savsar, M. and Çiçek, H. (2021) ‘Effects of Maintenance Policies on Production Costs and Systems Reliability in Canned Food Factory’, 5th International Symposium on Multidisciplinary Studies and Innovative Technologies, October  21-23, 2021, Turkey

      7.3. Uluslararası bilimsel toplantılarda sunulan ve bildiri kitabında basılan   bildiriler 

1.   Biles, W.E., and Savsar, M., “Analysis of Automated Production Flow Lines”, AIIE Proceedings, May 1982, New Orleans, LA., U.S.A., pp. 387-395.

2.   Kersavage, P.C., and Savsar, M., “Improving Sawmill Operating Efficiency With Computer Simulation”, Forest Products Research Society Conference, June 1983, Norfolk, VA. U.S.A.

3.   Savsar, M., and Biles, W.E., “A Simulation model for Automated Multistage Production Lines”, IIE Proceedings, May 1984, Chicago, U.S.A.

4.   Proctor, R.L., Savsar, M., and Stasiac, R., “Fault Tree Application to a System with Redundant Three-State Devices”, 3rd Cairo University Conference on Mechanical Design and Production, December 28-30, 1985, Cairo, Egypt. 

5.   Savsar, M., “Computerized Dynamic Scheduling of Maintenance Operations”, Proceedings of the IASTED International Conference on Reliability and Quality Control, June 24-26, 1987, Paris, France, 136-139.

6.   Proctor, C.L., El-Tamimi, A. and Savsar, M., “Reliability Modeling of a Gas Turbine Standby System”, Proceedings of the IASTED International Conference on Reliability and Quality Control, June 24-26, 1987, Paris, France, 125-128.

7.   El-Tamimi, A., and Savsar, M., “The Availability of a Two-Stage Production Line With Intermediate Buffer”, Proceedings of the IASTED International Conference on Reliability  and Quality Control, June 24-26, 1987, Paris, France, 117-120.

8.   Savsar, M., “Micro Simulator For Production Flow Lines”, Proceedings of the IXth International Conference on Production Research (ICPR), August 17-20, 1987, Cincinnati, Ohio, U.S.A, 1497-1503.

9.   Proctor, C.L., Savsar, M. and El-Tamimi, A., “Reliability Analysis of a Computer Hosting Configuration”, Proceedings of the IV the International Conference on Reliability and Exploitation of Computer Systems, RELCOMEX’87, October 13-16, 1987, Wroclaw, Poland, 277-286.

10.  Savsar, M., and Kilic, S.E. “A Computer Simulation Model for Tool Change Planning   in Multistage Manufacturing Systems”, Proceedings of the 10th National Computer Conference, February, 1988, King Abdulaziz University, Jeddah, Saudi Arabia, 575-587.

11.  Savsar, M., “Maintenance Crew Size Determination by Computer Simulation”, Proceedings of the Maintenance Planning and Operations Conference, March 1990,   King Saud University, Riyadh, Saudi Arabia, 223-239.

12.  Savsar, M., and Farrash, S.H., “Simulation of a Robotized Manufacturing Cell”,  Proceedings of the 6th IMC Conference on Advanced Manufacturing Technology, August 1989, Dublin, Ireland, 178-191.

13.  Savsar, M., Modeling of A Flexible Manufacturing Cell”, Proceedings of the 7th IMC   Conference on Advanced Manufacturing Technology and Systems, August 1990, Dublin, Ireland, 331-341.

14.  Al-Fawzan, M., Savsar, M., and Bolat, A., “Algorithms for Sequencing Mixed Model Products on a Paced Assembly Line”, Proceedings of the 9th IMC Conference on Advanced Manufacturing Technology and Systems, September 2-4, 1992, Dublin, Ireland.

15.  Savsar, M. Al-Fawzan, M., “Project Scheduling Under Variable Resource Constraints”, Proceedings of the 9th IMC Conference on Advanced Manufacturing Technology and Systems, September 2-4, 1992, Dublin, Ireland.

16.  Savsar, M., Khan, R.R., and El-Tamimi, A., “Modeling of Maintenance Policies in Just-In-Time Production Assembly Systems”, Proceedings of the Second Scientific Symposium on Maintenance Planning and Operations, 24-26 April 1993, King Saud University, Riyadh, Saudi Arabia, 95-108.

17.  Savsar, M., Bolat, A., and Khan, R., "Maritime Transportation Industry in the Kingdom of Saudi Arabia" Proceedings of the Fourth Saudi Engineering Conference, Nov. 5-8, 1995, Jeddah, Saudi Arabia. Vol. IV, pp. 527-533.

18.  Sharaf, M. A. F. and Savsar, M., “Effects of Maintenance Policies and Equipment Failures on the Availability of a Flexible Manufacturing Cell”, Second International Engineering Conference, Mansoura University, Egypt, April 1997.

19.  Savsar, M., “Effects of Duplicate Stations on the Performance of Automated Transfer Lines” The Second Jordanian International Conference for Mechanical Engineering, JIMEC’97, 1-5 June 1997, Amman, Jordan.

20.  Savsar, M., “Modeling and Analysis of a Flexible Manufacturing Cell”, 22nd International Conference on Computers and Industrial Engineering, Cairo, Egypt, 184-187, December 20-22, 1997.

21.  Savsar, M., “Analysis of Scheduling Policies for Assembly Lines with Duplicate Stations”, INFORMS Conference, Montreal, Canada, April 26-29, 1998.

22.  Savsar, M. and Choueiki, H., “Optimal Kanban Allocation in JIT Production Control Systems Using Neural Networks”, INFORMS Conference, Seattle, October 25-28, 1998.

23.  Savsar, M. and Choueiki, H., “Comparison of Two Kanban Allocation Meta Models in JIT Production Control Systems”, International Conference on Industry, Engineering, and Management Systems (IEMS’99), Cocoa Beach, Florida, March 8-10, 1999.

24.  Savsar, M. and Allahverdi, A., “Scheduling of Jobs on m Serial Duplicate Stations”, Fourth Workshop on Models and Algorithms for Planning and Scheduling Problems (MAPSP’99), Renesse, The Netherlands, June 14-18, 1999.

25.  Savsar, M. “Maintenance Crew Size Determination in a Cable Factory by Computer Simulation”, International Conference on Industry, Engineering, and Management Systems (IEMS), Cocoa Beach, Florida, March 13-15, 2000, 315-324.

26.  Savsar, M. “Simulation of a Pull-Push System in an Assembly Line”, IFORMS, San Antonio, Texas, November 5-8, 2000.

27.  Savsar, M., “Effects of Maintenance Policies on the Availability of Flexible Manufacturing Cells”, Joint International Conference on Industry, Engineering, and Management  Systems (IEMS) and International Conference on Computers and Industrial Engineering (ICC&IE), Cocoa Beach, Florida, March 5-7, 2001, 241-248.

28.  Al-Ibrahim, M., Savsar, M., and Adi, W., “A Security Analysis for Label Switching Routers”, International Symposium on Telecommunications, IST 2001, Tehran, Iran, 1-3 September, 2001.

29.  Savsar, M. and Allahverdi, A., “Scheduling on Assembly Lines with Serial Duplicate Stations”, 1st International Industrial Engineering Conference (IIC), Amman Jordan, 23-27 September 2001, 241-248.

30.  Savsar, M. “Simulation and Neural Network Modeling of JIT Production Control Systems”, Proceedings of the International Conference on Business Decision and Technology (AMSE Conference), Kuwait, 18-20 March 2002, 288-299.

31.  Savsar, M. “Productivity of a Flexible Manufacturing Cell Under Different Failure Rates and Maintenance Policies”, Proceedings of the 2nd International Conference on Responsive Manufacturing (ICRM-2002), Gaziantep, Turkey, 26-28 June, 2002, pp. 389-401.

32.  Savsar, M. “A Meta-modeling Approach to JIT Production Control Systems”, Proceedings of the 2nd International Conference on Responsive Manufacturing (ICRM- 2002), Gaziantep, Turkey, 26-28 June 2002, 189-293.

33.  Savsar, M., “Analysis of the Performance of Manufacturing Cell Operating Under Different Failure Rates and Maintenance Policies”, Proceedings of the 6th Saudi Engineering Conference, UPM, Dammam, Saudi Arabia December 14-16, 2002. Vol.5 pp. 535-549.

34.  M. Savsar , "Flexible Facility Layout Design ",Group Technology/Cellular Manufacturing-World Symposium ,Proceedings of the Group Technology/Cellular Manufacturing ,Columbus, Ohio, USA ,Ohio University ,pp.107-112 ,July ,2003 .

35.  Savsar, M. , "Modeling of an Unreliable Production Merging Process with Intermediate Storage Tank ", Proceedings of International Conference on Mathematics and its Applications (ICMA 2004), Kuwait University, Kuwait, April, 2004, pp. 247-253.

36.  Savsar, M., and Youssef, A.S. "An Integrated Simulation-Neural Network Meta Model Application in Designing Production Flow Lines ", Proceedings of 3rd WSEAS International Conference on Artificial Intelligence, Knowledge Engineering, Data Bases (AIKED 2004), Salzburg, February, 2004 .

37.  Savsar, M. and Aldaihani, M., “Modeling and Analysis of a Flexible Manufacturing Cell with Two machines Served by a Robot”, The 4th International Conference on Intelligent Manufacturing Systems”, Sakarya University, Sakarya, Turkey, September 6-8, 2004.

38.  Savsar, M. “Reliability and Productivity of a two-Stage Production Process”, The 4th International Conference on Intelligent Manufacturing Systems”, Sakarya University, Sakarya, Turkey, September 6-8, 2004.

39.  Abdulmalek, F., Savsar, M., and Aldaihani, M., “Simulation of Tool Change Policies in a Flexible Manufacturing Cell”, WSEAS Conference on Simulation, Modeling and Optimization, Izmir, Turkey, September, 14-16, 2004.

40.  AlSalamah, M., Shayan, E, and Savsar, M. “Reliability and Availability Analysis of Sea Water Pumping Station Plant”, Proceedings of the International Mechanical Engineering Conference (IMEC), December 5-8, 2004, Kuwait, pp. 174-197.

41.  Al-Rashdan, K., Almutawa, S., and Savsar, M. “Machine Selection Optimization in Multi-Stage Manufacturing Systems with Balancing Constraints”, Proceedings of the International   Mechanical Engineering Conference (IMEC), December 5-8, 2004, Kuwait, pp. 701-713.

42.  Savsar, M. and Youssef , A. S., "Optimum Buffer Allocation in Serial Production Lines Using Neural Networks” 2nd International Industrial Engineering Conference (IIEC 2004), December 19-21, Riyadh, Saudi Arabia, December 19-21, 2004.

43.  Savsar, M. “Modeling and Analysis of a Manufacturing Line Under Maintenance Operations”, Proceedings of the International Mechanical Engineering Conference (IMEC), December 5-8, 2004, Kuwait, pp. 163-173.

44.  Savsar, M. and Abdulmalek, F., “Modeling of a Pull-Push Production Control System To Minimize Inventory and Demand Delay Costs”, 1st International Conference on Modeling, Simulation and Applied Optimization (ICMSAO’05), February 1-3, 2005, American University of Sharjah, Sharjah, UAE.

45.  Aldaihani, M. and Savsar, M., “Stochastic Modeling of a FMC with Two Machines Served by Two Robots and a Pallet”, 1st International Conference on Modeling, Simulation and Applied Optimization (ICMSAO’05), February 1-3, 2005, American University of Sharjah, Sharjah, UAE.

46.  Savsar, M., “Modeling of a Multi-Stage Production Line with Maintenance Operations”, International Conference on Industrial Engineering and Systems Management (IESM’05) May 16-19, 2005, Marrakech, Morocco.

47.  Aldaihani, M. and Savsar, M., “Modeling of a Flexible Manufacturing Cell with Two Unreliable Machines Served by Two Robots”, Presented at the Informs Annual Conference, November 13-16, 2005, San Francisco, CA, USA.

48.  Savsar, M., “Modeling of a Push-Pull Production Control System with Constant WIP and Unreliable Equipment”, Proceedings of the 4th International Industrial Engineering Conference (IIEC), December 11-12, 2005, Tehran, Iran.

49.  Savsar, M., “Buffer Allocation in Serial Production Lines with Preventive and Corrective Maintenance Operations”, Proceedings of Tehran International Congress on Manufacturing Engineering (TIMCE’2005), December 12-15, 2005, Tehran, Iran.

50.  Savsar, M., “Calculating Production Rate of a Flexible Manufacturing Module”, Proceedings of the 12th International Conference on Machine Design and Production (UMTIK’06), September 5-8, 2006, Kusadasi, Turkey.

51.  Savsar, M., “Analysis of Unreliable Production Systems with Constant Work-In-Process”, Proceedings of the 12th International Conference on Machine Design and Production (UMTIK’06), September 5-8, 2006, Kusadasi, Turkey.

52.  Savsar, M., “Manufacturing Line Simulator for Design and Performance Evaluation”, Proceedings of the International Conference on Modeling and Simulation (MS2006), August 28-30, 2006, Konya, Turkey.

53.  Savsar, M. and Allahverdi, A. “Senior Design Course in Industrial Engineering at Kuwait University”, 2nd International Conference on Engineering Education & Training (ICEET-2), April 9-11, 2007, Kuwait.

54.  Savsar, M. and Youssef, A. S., “Neural Network Applications to Buffer Allocation Problems in Automated Transfer Lines” Al-Azhar Engineering Ninth International Conference (AEIC-2007), April 12-14, 2007, Cairo, Egypt.

55.  Savsar, M. “Simulation Modeling of Production Systems with Constant WIP and Unreliable Equipment”,37th International Conference on Computers and Industrial Engineering”, October 20-23 , 2007, Alexandria, Egypt. pp. 2461-2467.

56.  Savsar, M. “Modeling and Analysis of a Flexible Manufacturing Module”, International Conference on Engineering and ICT (ICEI 2007), 27-28 November 2007, Melaka, Malaysia, pp 431-437.

57.  Savsar, M. and Moiedh Al-Ajmi, “A Quality Control Application for Health Care Management Systems”, Middle East Quality Association (MEQA) 2nd Annual Congress, Dubai, UAE, April 7-9, 2008.

58.  Savsar, M., “Serial Production Line Design By Simulation Modeling”, Proceedings of the TMCE 2008, International Conference on Tools and Methods of Competitive Engineering (TMCE), April 21-25-2008, Izmir, Turkey

59.  Savsar, M. and Ashkanani, A. “Maintenance Modeling and Analysis for an Oil Filling Plant”, 13th International Conference on Machine Design and Production (UMTIK’08), September 3-5, 2008, Istanbul, Turkey.

60.  Savsar, M., “Modeling of Maintenance Operations at an Oil Filling Plant”, 6th International Conference on Intelligent & Manufacturing Systems, October 14-17, 2008, Sakarya University, Sakarya, Turkey

61.  Savsar, M., Al-Yousufi, H. and Dehrab, S. “A Quality Control Application for Canned Food Manufacturing”, Middle East Quality Association (MEQA) 3rd Annual Congress, Dubai, UAE, April 6-7, 2009.

62.  Savsar, M. and Aleisa, E. E., “Analyzing In-Flight Air Hostess Tasks Through Discrete-Event Simulation”, 7th Industrial Simulation Conference-ISC2009, June 1-3, 2009, Loughborough, United Kingdom.

63.  Salamah, M. B., Kapoor, A., Savsar, M., Ektesabi, M., Abdedhdaee, A. “The Importance of Accurate Water Metering in Resource Management”, 4th International Conference on Sustainable Development and Planning”, 13-15 May, 2009, Cyprus

64.  Savsar, M. “Modeling and Simulation of a Serial Production Line with Constant Work-In-Process”, International Conference on Modeling and Simulation (ICMS 2009), May 27-29, 2009 Tokyo, Japan.

65.  Savsar, M. "Reliability Modeling of A Manufacturing Cell Operated Under Degraded Mode", International Conference on Industrial Engineering and Operations Management (IEOM 2010), January 9-10, 2010, Dhaka, Bangladesh.

66.  Savsar, M. "Modeling and Analysis of Fire Center Locations in a City to Minimize Response Time”, International Conference on Industrial Engineering and Operations Management (IEOM 2010), January 9-10, 2010, Dhaka, Bangladesh.

67.  Savsar, M., Al-Duaij, A., and Al-Banwan, H. "A Quality Control Application in Cooperative Society Supermarkets" Middle East Quality Association (MEQA) 4th Annual Congress, Dubai, UAE, March 22-24, 2010.

68.  Savsar, M. "Analysis of Flexible Manufacturing Cells Operated Under Fault Tolerant-States", 8th International Conference on Modeling and Simulation (MOSIM), Hamamat, Tunisia, May 10-12, 2010.

69.  Savsar, M. "Analysis of a Flexible Manufacturing Cell with Two Unreliable machines and a Single Repair Crew", 7th International Conference on Intelligent & Manufacturing Systems, September 15-17, 2010, International University of Sarajevo, Sarajevo, Bosnia Herzegovina.

70.  Savsar, M. and Aldaihani, M., "Stochastic Modeling of the Effects of Corrective Maintenance Policies on Performance of Manufacturing Modules", International Conference on Mathematical Sciences (ICMS-2010), November 23-27, 2010, Abant Izzet Baysal University, Bolu, Turkey.

71.  Savsar, M., Atash, M., and Alnaqi, J. "Modeling and Analysis of Bus Routing Operations at Kuwait Public Transport Company", International Conference on Industrial Engineering and Operations Management (IEOM 2011), January 22-24, 2011, Kuala Lumpur, Malaysia.

72.  Savsar, M. "Modeling and Simulation of Maintenance Operations at Kuwait Public Transport Company", International Conference on Challenges in Statistics and Operations Research, March 8-10, 2011, Kuwait University, Kuwait

73.  Savsar, M. and Aldaihani, M. "Optimum Product Mix Selection from Waste Oil: A Linear Programming Application", 6th International Advanced Technologies Symposium (IATS'11), 16-18 May 2011, Elazig, Turkey.

74.  Al-Jadi, A., Aleisa, E., Savsar, M., Al-Mashaan, M., and Al-Sabah, S. “Spatial Analysis and Evaluations of Fuel Stations' Locations using GIS and Analytical Location”, presented in the International Conference on Industrial Engineering (ICIE), January 29-31, 2012, Dubai, United Arab Emirates.

75.  Savsar, M. and Abdulmalek, F. “Statistical Analysis of Aircraft Maintenance Operations Using Design of Experiments”, 9th International Symposium on Tools and Methods of Competitive Engineering, TMCE-2012, May 7-11, 2012, Karlsruhe, Germany.

76.  Savsar, M. “Modeling and Analysis of a Fire Station Location”, International Conference on Industrial Engineering and Operations Management (IEOM), July 3-6, 2012, Istanbul, Turkey

77.  Savsar, M. “Modeling of Maintenance Operations in a Service Organization: A Case Application” International Conference on Industrial Engineering and Operations Management (IEOM), July 3-6, 2012, Istanbul, Turkey.

78.  Savsar, M., Alardhi, M., and Almazrouee, A. “Savsar, M. “Capacity and Availability Analysis of Power Plants in Kuwait”, International Conference on Industrial Engineering and Operations Management, July 3-6, 2012, Istanbul, Turkey.

79.  Savsar, M. "Analysis of Maintenance Activities in a Service Organization: A Case Application", 2012 INFORMS Manufacturing & Service Operations Management (MSOM) Conference, June 17-19, Columbia University, New York, USA, 2012.

80.  Savsar, M. “Modeling and Scheduling of Maintenance Operations for Fuel Dispensers" 8th International Conference on Intelligent & Manufacturing Systems, September 27-28, 2012, Antalya, Turkey.

81.  Savsar, M. “Simulation Modeling of Fire Station Locations Under Traffic Obstacles", International Conference on Computational Modeling, Analysis and Simulation, January, 14-15, 2013, Zurich, Switzerland.

82.  Aleisa, and Savsar, M. “Modeling of Firefighting Operations through Discrete Event Simulation", 4th International Conference on Computer Modeling and Simulation, February 24-25, 2013, Rome, Italy.

83.  Savsar, M. "Simulation Modelling of Maintenance Operations for an Automotive Company," International Conference on Industrial Engineering and Management, February 27-28, Barcelona, Spain.

84.  Savsar, M. “Simulation Analysis of the Effects of maintenance Policies on Manufacturing Line Productivity”, 4th International Conference on Mechanical and Aerospace Engineering (ICMAE-2013), July 20-21, 2013, Moscow, Russia.

85.  Savsar, M., Nadoom, A., Al-Muraished, D., Ibrahim, R., and Al-Debasi, M. “Analysis of Delivery and Assembly Operations in a Furniture Company Using Discrete Event Simulation,” Submitted to the International Conference on Industrial Engineering and Operations Management, January, 7-9, 2013, Bali, Indonesia.

86.  Savsar, M. “Simulation Modeling for Productivity Analysis of Unreliable Flexible Manufacturing Cells,” International Conference on Industrial Engineering and Manufacturing Systems Engineering, December 5-6, 2013, Istanbul, Turkey

87.  Savsar, M. “Analysis and Simulation of a Production Line in a Bakery System,” Joint International Symposium of 44th Computers & Industrial Engineering (CIE'44) and Intelligent Manufacturing & Service Systems (IMSS'14), October 14-16, 2014, Istanbul, Turkey.

88.  Savsar, M. and Al-Ali, M. “Fault Tree Application to Safety Problems in Oil Industry”, Submitted to International Conference on Industrial Engineering and Operations Management, March, 3-5, 2015, Dubai, UAE.

89.  Savsar, M. “Analysis of the Effects of maintenance Polices on the Availability of a Power Plant,” 21st International Conference on Industry, Engineering, and Management Systems (IEMS’21), March 23-25, 2015, Cocoa Beach, Florida, USA.

90.  Savsar, M. “Stochastic Modeling and Productivity Analysis of a Flexible Manufacturing System,” ICCI 2015: 17th International Conference on Creative Industry, June 4-5, 2015, New York, USA.

91.  Savsar, M. “Modeling and Analysis of a Flexible Manufacturing Cell with Three Machines and a Robot,” INFORMS, 1-4 November 2015, Philadelphia, USA.

92.  Savsar, M., Aeisa, E.,  Aljaser, and Alhijji, A, “A Multi-Criteria Approach to Review Different Cleaning Methods and maintenance Schedules for PV Solar Panels of Prospective University Campus in Kuwait,” Ecocity World Summit. 11-13 October, 2015, Abu Dhabi.

93.  Aeisa, E., Savsar, M., Esraa, AlQenaei, E. and Almutairi, S., “Conceptual and Detailed Design of Utilizing a Prospective State University Rooftop to Generate Energy Using an On-Grid Photovoltaic Solar System,” Eco city World Summit. 11-13 October, 2015, Abu Dhabi.

94.  Savsar, M. “Reliability, Availability and Capacity Analysis of Power Plants in Kuwait,” International Conference on Power Engineering and Technology-ICPET, 19-20 April, 2016, Istanbul, Turkey.

95.  Savsar, M. “Reliability and Availability Analysis of a Manufacturing Line System,” Istanbul 30th International Conference on Engineering & Technology, Computer, Basic & Applied Sciences (ECBA- 2016), August 2-3, 2016 Istanbul, Turkey.

96.  Savsar, M. and Al-Ali, M., and Abdou, M. “Fault Tree Analysis of Hazardous Conditions and Near Misses in a Company: A Case Application,” International Conference on Industrial Engineering and Operations Management, IEOM Detroit Conference, Lawrence Technological University, Detroit, Michigan, USA, September 23 – 25, 2016.

97. Savsar, M., Elsaadany, A. K., Hassneiah, R., and Alajmi, A. (2017)” Analysis of a Manual Mixed-Model Assembly Line in Food Processing Industry: A Case Study,” International Conference on Industrial Engineering and Operations Management (IEOM 2010), April 11-13, 2017, Rabat, Morocco.

98. Savsar, M., “Analysis and Improvement of Efficiency for Food Processing Assembly Lines,” International Conference on Production Engineering and Management, 24-25 April, 2017, Boston, USA.

99. Savsar, M., Elsaadany, A. K., Hassneiah, R., Alajmi, A. “Analysis of a Manual Mixed-Model Assembly Line in Food Processing Industry: A Case Study”, Proceedings of the International Conference on Industrial Engineering and Operations Management , Rabat, Morocco, April 11-13, 2017

100. Savsar, M. “Teaching a Senior Design Course in Industrial Engineering”, 5th International Conference in Education and Social Sciences, INTCESS’18, February 5-7, 2018, Istanbul, Turkey.

101. Savsar, M. “Reliability Analysis of a Life Supports System in a Public Aquarium”,    Proceedings of the International Conference on Science, Engineering, and Technology (ICSET), 6-7 April, 2019, Istanbul, Turkey.

102. AlKheder, S., Savsar, M., AlRukaibi, F., and Zaqzouq, A. “Optimal Fleet Size for Kuwait Public Transport Company Based on Integer Linear Programming,” IEEE intelligent transportation systems conference - ITSC 2019, Auckland, New Zealand 27-30 October

103. Savsar, L. and Savsar, M. “Healthcare Quality and Narrative Medicine,” Proceedings of

       the 5th  International Conferences on Education and Social Sciences, 21-23 October,

       2019, Istanbul, Turkey. 

104. Savsar, M. and Alotaibi, H. (2020) “A Quality Control Application in Furniture

       Manufacturing,” IEOM Conference, Dubai, 10-12 March 2020.

105. Savsar, M. and Aldehaim, A. (2020) “Analysis and Improvement of a Facility Layout in a

       Furniture Factory: A Case Application,”  IEOM Conference, Dubai, 10-12 March 2020.

106. Savsar, M. (2019) “Markov Chain Analysis of a Power Plant Availability”, 20th

       International Symposium on Econometrics, Operations Research and Statistics February

      12-14, 2020, Haci Bayram Veli University, Ankara, Turkey.

      7.4. Yazılan uluslararası kitaplar veya kitaplarda bölümler 

1.   Savsar, M., “Simulation and Neural Network Modeling of JIT Production Control  Systems”, chapter in “Best of Books” of AMSE Conferences for 2002.

2.   Savsar, M., “Manufacturing Line Simulator for Design and Performance Evaluation”, chapter in “Best of Books” of AMSE Conferences for 2006.

3.   Maintenance Management and Modeling in Modern Manufacturing Systems, Chapter in a book titled “Manufacturing the Future” by Advanced Technologies: Research-Development-Application, ARS Press Vienna, Austria, 2006.

4.   Savsar M. "Modeling and Analysis of Flexible Manufacturing Systems", Chapter published in the book titled: Future Manufacturing Systems by Sciyo, 2010.

5.   Savsar, M., Ed., Quality Assurance and Management, In-Tech Publications, ISBN: 978-953-308-436-7, 2012..

6.   Savsar, M. (2013) "Modeling of Hybrid Production Systems with Constant WIP and Unreliable Equipment” chapter in a book entitled “Management Innovations for Intelligent Supply Chains" in the book series Advances in Information Systems and Supply Chain Management; IGI Global Publishing, USA, 2013.

7.   Savsar, M. (2013), “Modeling of Maintenance Operations" chapter in the Encyclopedia of Business Analytics and Optimization. IGI Global Publishing, USA, 2013.

8.   Savsar, M. (2013), “Analysis of Maintenance Operations-A Case Application" chapter in the Encyclopedia of Business Analytics and Optimization. IGI Global Publishing, USA, 2013.

      7.5. Ulusal hakemli dergilerde yayınlanan makaleler 

1.   Savsar, M. (1983), “Automated Transfer Lines and Industrial Engineering Applications”, Industrial Engineering Journal (Turkish), Vol. 6, 7-11.

2.   Savsar, M. and Shih, I.H. (1983), “A Fortran Program for Cholesky Factorization to Solve Linear Programming Problems”, Anatolian University Journal of Engineering, Vol. 1, No. 1, 1-4.

3.   Savsar, M. (1984), “Multi-Stage Automated Manufacturing Systems” Transactions on Operational Research, Vol. 3, pp.112-124.

4.   Savsar, M. (1984), “A View on Group Technology and Other Manufacturing Systems”, Anadolu University Journal of Engineering, Vol. 2, No. 1, 15-27.

5.   Savsar, M. and Erol, D. (1984), “Determination of Production Tolerances” Engineering and Machinery Journal, Vol. 25, No. 295, 3-5.

      7.6. Ulusal bilimsel toplantılarda sunulan ve bildiri kitabında basılan bildiriler 

1.   Savsar, M., “Goal Programming Application to Harvest Scheduling Problems”,    National Operations Research Congress, June 21-23, 1983, Ankara, Turkey.

2.   Savsar, M., “Simulation of Automated Production Flow Lines”, Turkish National Operations Research Congress, June 28-30, 1984, Istanbul, Turkey.

3.   Savsar, M. “Equipment Selection for a Multi-Stage Manufacturing System with batch Processing”, Operations Research /Industrial Engineering Congress (YAEM), Cukurova University, Adana, Turkey, June 16-19, 2004.

      7.7. Diğer yayınlar 

1.   Savsar, M., Analysis of Production Systems, Anadolu University, Faculty of Engineering Publications No: 59, 1984, Turkey.

2.   Savsar, M., Analysis of Material Handling Systems, Anadolu University, Faculty of Engineering Publications, No: 60, 1984, Turkey.

3.   Savsar, M., "Sample Events in Quality Control", Manual for Quality Control, Eskisehir Locomotive and Motor Industry, April 3-6, 1984, Turkey.

4.   Savsar, M. and Aldaihani, M. (2018) “Stochastic Modeling And Analysis of A Flexible Manufacturing Cell Operated With Limited Repair Capacity,” submitted for publication in the International Journal of Operational Research.

5.   Savsar, M. and Aldaihani, M. (2018) “A Linear Programming Application to Product Mix Selection From Waste Oil” submitted for publication in the International Journal of Modeling in Operations Management.

6.   Savsar, M. (2018) “Reliability, Maintenance and Availability Analysis of Power Plants in Kuwait” submitted for publication in the International Journal of Reliability and System Safety.

8.   Abdulmalek, F. and Savsar, M. (2018) “Modeling and Simulation Analysis of Aircraft Maintenance Operations” submitted for publication in the International Journal of Reliability and Engineering Systems Modelling & Simulation.

8. Projeler 

Pennsylvania Agricultural Experiment Station, McIntire Project Grant No: 2494 (1981-1982): “Development of a Mathematical Model and a Computer Simulation Package for Sawmill Operations”

King Saud University, College of Engineering Research Center Project Grant No: 8/405 (1985-1986): “Development of a Computer Simulation Package for Animation of Production Lines on Microcomputers”

King Abdulaziz City for Science and Technology, Riyadh, Saudi Arabia. Project Grant No: AR-13-63 (1992-1995): “Study and Development of Maritime Transportation in the Kingdom of Saudi Arabia”

Kuwait University, Research Administration. Project Grant No: EM 125 (1998-1999): “Optimal Kanban Allocation in Just-In-Time Production Control Systems Using Neural Networks”  

Kuwait University, Research Administration. Project Grant No: EM 01/99 (1999-2001): “Analysis of the Effects of Maintenance Policies on Availability of Flexible Manufacturing Systems”

Kuwait University, Research Administration. Project Grant No: EI02/03 (2003-2004): “Analysis of Optimal Buffer Allocations in serial Production Flow Lines Using Simulation and Neural Networks”

Kuwait University, Research Administration. Project Grant No: EI03/05 (7/2006 - 7/2007): “Modeling of Hybrid Push-Pull Production Control Systems with Constant Work-In-Process and Unreliable Equipment”

Kuwait University, Research Administration. Project Grant No: EI01/08 (11/2008-11/2009): “Modeling and Analysis of Maintenance Operations in the Context of a Selected Factory”

Kuwait University, Research Administration. Project Grant No: EI04/09 (5/2010-5/2011): “Reliability Modeling of a Manufacturing System Operated Under Limited Repair"     

 

Kuwait University, Research Administration. Project Grant No: EI02/11 (6/2011-6/2012): "Fire Station Location Analysis in a Metropolitan Area"

Kuwait University, Research Administration. Project Grant No. EI03/12 (11/2012-11/2013): “Productivity Analysis of an Unreliable Flexible Manufacturing System".

Kuwait University, Research Administration. Project Grant No. EI01/14 (9/2014-9/2015): “Productivity Analysis of Electrical Power Generation and Demand for Electrical Utility in Kuwait".

9. İdari Görevler 

  • Bölüm Başkanı, Üsküdar Üniversitesi, Mühendislik ve Doğa Bilimleri Fakültesi, Endüstri Mühendisliği Bölümü, 2020-.
  • Senato Üyesi, Üsküdar Üniversitesiö Istanbul, 2020-.
  • Chairman, Department of Industrial Engineering, Faculty of Engineering & Natural Sciences, Üsküdar University, Istanbul, Turkey. (2020-)ç
  • Member in Üsküdar University Senate (2020-)ç
  • Chairman, Department of Industrial & Management Systems Engineering, College of Engineering & Petroleum, Kuwait University, Kuwait. (2006-2010)
  • Assistant Chairman, Department of Industrial Engineering, Anadolu University, Eskisehir, Turkey, (1982-1984).
  • IE Group Coordinator, Industrial Systems Engineering, King Saud University, Mechanical Engineering Department (1988-1991), Riyad, Saudi Arabia.
  • B.Sc. Projects Coordinator, King Saud University, Mechanical Eng. Dept. (1993-1997).
  • Coordinator for Engineering Economy, King Saud University, College of Engineering (1992-1996), Riyad, Saudi Arabia.
  • Academic Development Committee for Industrial Engineering, King Saud University, Mechanical Engineering Department (1990-1993).
  • Consultation and Short Courses Committee, Kuwait University, Mechanical &
  • Industrial Systems Engineering Department, 1997-98.
  • Ethics Committee for the ABET 2000 Program, Kuwait University, Mechanical & Industrial Systems Engineering Department, 1997-98.
  • Industrial Engineering Curriculum Committee, Kuwait University, Mechanical & Industrial Systems Engineering Department, 1997-98.
  • Social and Scientific Activities Committee, Kuwait University, Mechanical & Industrial Systems Engineering Department, 1998-99.
  • Industrial Partnership Program Committee, Kuwait University, Mechanical & Industrial Systems Engineering Department, 1998-99.
  • Industrial Engineering Labs Committee, Kuwait University, Mechanical & Industrial Systems Engineering Department, 1998-2001.
  • Textbook Committee, Kuwait University, Mechanical & Industrial Systems Engineering Department, 2000-2001.
  • College Outcome Assessment Committee, Kuwait University, Mechanical & Industrial Systems Engineering Department, 2000-2005.
  • Consultation &Career Development Committee, Kuwait University, Mechanical & Industrial Systems Engineering Department, 2000-2001.
  • Library Coordinator, Kuwait University, Industrial & Management Systems Engineering Department, 2001-2003.
  • Safety & Security Committee, Kuwait University, College of Engineering & Petroleum, 2001-2003.
  • Facilities Development Committee, Kuwait University, Industrial & Management Systems Engineering Department, 2001-2006.
  • Chairman, Department of Industrial & Management Systems Engineering, College of Engineering & Petroleum, Kuwait University, Kuwait, (2/2006-2010)
  • Research Committee Member, Kuwait University, College of Engineering & Petroleum, 2010-2011.
  • External Advisory Board Committee, Kuwait University, IMSE Department, 2006-2011.
  • Chairmen’s Committee, Kuwait University, College of Engineering & Petroleum, 2006-2010.
  • College Council Committee, Kuwait University, College of Engineering & Petroleum, 2003-2010.
  • Annual Report Coordinator, Kuwait University, IMSE Department, 2006-2010.
  • Excellent Research Award Committee, Kuwait University, College of Engineering & Petroleum, 2012.
  • Undergraduate Program Committee, Kuwait Univ., College of Eng. & Petroleum, 2003-2016.
  • Promotion Committee, Kuwait University, IMSE Department, 2003-2018.
  • Appointment & Contract Renewal Committee, Kuwait University, IMSE Department, 2006-2019.
  • Scholarship Committee, Kuwait University, Industrial & Management Systems Engineering Department, 2002-2016.
  • Graduate Studies Committee, Kuwait University, Industrial & Management Systems Engineering Department, 2002-2019.
  • College Promotion and Appointment Committee, Kuwait University, College of Engineering & Petroleum, 2013-2019.
  • Graduate Program Coordinator, Kuwait University, Industrial & Management Systems Engineering Department, 2016-2018.

10. Bilimsel ve Mesleki Kuruluşlara Üyelikler 

•     Senior Member, Institute of Industrial Engineers, U.S.A.

•     Member, INFORMS, Institute for Operations Research & Management Science, USA

•     Member, New York Academy of Sciences, USA.

•     Member, Turkish Operations Research Society.

•     Member, Turkish Society of Mechanical Design and Production.

•     Member SCIEI (Science and Engineering institute).

•     Member, The International Institute of Innovation, Industrial Engç and Entrepreneurship (I4E2).

•     Editor, JER: Journal of Engineering Research, Kuwait.

•     Editor, In-Tech, Open access Publisher

•     Editorial Board Member, Journal of Management and Engineering Integration.

•     Editorial Board Member, Advances in Industrial Engineering and Management

•     Editorial Board Member, International Journal of Applied Management Science

•     Editorial Board Member, International Journal of Data Analysis Techniques and Strategies.

•     Editorial Board Member, International Journal of Health Care Quality Assurance.

•     Editorial Board Member, International Journal of Engineering and Business Management (IJEBM).

•     Editorial Board Member, International Journal of Industrial Engineering and Operations Management

•     Editorial Board Member, Journal of Intelligent Systems: Theory and Applications.

•     International Advisory Board member, The Journal of Enginç Sciences, Sultan Qaboos University.

•     Member of International Scientific Council, World Academy of Science and Engineering (WASET)

•     Member, SCIEI (Science and Engineering Institute)

•     Editorial Board Member, Journal of Engineering Sciences, Anadolu University, Turkey (1982-1985).

•     Reviewer for International Journal of Production Research

•     Reviewer for International Journal of Production Economics

•     Reviewer for European Journal of Operations Research

•     Reviewer for Computers & IE

•     Reviewer for Computers & OR.

•     Reviewer for Simulation Journal

•     Reviewer for International Journal of Production Planning and Control

•     Reviewer for Journal of Intelligent Manufacturing Systems

•     Reviewer for International Journal of Systems Science

•     Reviewer for the Int. Journal of Advanced Manufacturing Technology Management

•     Reviewer for International Journal of Industrial and Systems Engineering

•     Reviewer for the Journal Mathematical and Computational Application.

•     Reviewer for International Journal of Quality and Reliability Management

•     Reviewer for King Saud University Journal of Engineering Sciences

•     Reviewer for Kuwait Journal of Science & Engineering

•     Reviewer for International Journal of Health Care Quality Assurance

•     Reviewer for Journal of Modeling and Simulation in Engineering

11. Ödüller 

•     Best Paper Award in IEOM Conference, March 10-12, 2020, Dubai, UAE

  • Best Paper Award in the International Conference on Industrial Engineering & Operations Management (IEOM), Istanbul, Turkey, July 4-6, 2012.

•     Best Paper Award in the Middle East Quality Association (MEQA) 2nd Annual Congress in Dubai, UAE, April 7-9, 2008.

•     Best Researcher Award, College of Engineering & Petroleum, Kuwait University, November, 2007

•     Best Paper award in TICME 2005, Tehran International Congress on Manufacturing Engineering, December 12-15, 2005, Tehran, Iran.

•     Best Paper award in the 2nd International Conference on responsive Manufacturing, 26-28 June 2002, Gaziantep, Turkey

•     Scholarship from Turkish department of Forest industry (1971-75)

•     Doctoral Fellowship from Turkish Ministry of Education (1976-82)

•     President Scholarship from the Pennsylvania State University (1980-81)

Üniversitemizle ilgili “AKLINDA NE VARSA” bize sor!